Customised kits / trade orders
Do you have special requirements, want to order as a trade customer or you need a fully customised kit? No problem. We can build your kit exactly to your requirements. Find detailed instructions how to order the perfect kit.
1 ) First, try one of the pre-made kits.
Open the online configurator, find the product you wish to purchase and click at the blue "Configure" button. Once the page fully loads, select your preferred voltage / controller and choose one of the kits. We offer many different kits for vehicles, marine and off-grid applications. All have been carefully designed to be very universal, and may work for majority of scenarios. Carefully check the detailed comparison chart of the kits to review the smallest differences. Alternatively try to select one of the kits and review the parts list at the bottom of the online configurator. You can show part list by clicking at the grey button "SHOW PART LIST". If you find the perfect kit that would work for you without any modification, you do not need to customise the kit and you can place the order directly through the interactive online configurator. But if you are a trade customer, keep reading from the chapter 4). In case you are both retail & trade customer and wish to make any modifications of the kit, step to chapter 2).
2 ) Find the kit closest to your target part list.
Select the kit that you think is closest to the required part list. The closer you match, the less modifications you need to list.
3 ) Check our available parts & accessories.
Yes, we have a huge selection of parts, accessories and other installation material. Review all the categories of our Parts & Accessories to see all we can supply, alternatively contact us to discuss your options..
4 ) Finish your configuration with one of the kits.
Select all the following options until you see a message "WELL DONE! You have just built your perfect diesel heater kit...".
5) List the modifications
Review the parts list you generated and prepare a list of the parts you would like to add or remove.
6) Prepare the summary and send us an email
Remember that you will have to provide the summary containing the detailed configuration according to the options you selected in the online configurator plus a list of the parts to be added / removed if there are any.
To make your life easier, we have created system that allows you to convert any configuration into the universal URL link you can share or even save to review and come back later. To generate the configuration automatically, firstly click on the small blue link "Save & share" in the grey box containing ADD TO CART button. This will open the pop-up window that allows you to copy the URL link. This link represents the configuration you have just selected. Please paste the URL to the e-mail draft.
Now just simply prepare the list of the modifications divided to two groups (ADDED PARTS & REMOVED PARTS). Send us the email with the summary of your order to firstname.lastname@example.org.
Do not forget to include the delivery address, so we can calculate the shipping cost.
7) Wait for the quotation
We will send you a reply with a detailed quote before you receive the final invoice. Alternatively we will contact you in case of any clarifications required.
Bottom Plate Turret Plate Shape SS
4x Air Vent / Inlet & Outlet Ø 60mm Type E
T-Junction Ø 60mm
3m Duct Hose Ø 60mm
2x Hose Clamp Ø 60mm
Bottom Plate 2mm SS
3x Air Vent / Inlet & Outlet Ø 60mm Type A
1) This will add additional 1 piece of T-Junction Ø 60mm = total 2pcs.
2) This will add additional 3m of Duct Hose Ø 60mm on top of the included 2m length = total 5m, you will receive the continuous length 5m.
3) If you modify your duct or combustion system, do not forget to calculate the exact quantity of hose clamps you require.
30% OFF for any extra parts
Remember, you receive the 30% discount for any extra parts you order on top of the basic kit no matter if its contained in the higher kit or as a list of the added parts on top of the fully configured product. We offer transparent pricing for all kits. It is calculated as the amount for all additional parts contained in the kit on top of the basic kit and then discounted by 30% ! The basic kit is the RV STARTER or STANDARD KIT.